General Spectrometer Accessories
Glass Expansion Conikal DC Nebulizer 1mL/min, Includes NFT-16-50 UniFit Connector with 0.50mm ID x 1.6mm OD x 700mm long tubing (1 piece) and 70-803-1105 Type 13 DC Fitting with Ratchet Nebulizer connector
Conikal DC Nebulizer 1.0mL/min, includes UniFit Connector with 0.50mm ID x 1.6mm OD x 700mm long tubing (1 pc) and DC Gas Fitting Type 13 with ratchet connector (1 pc). Compatible with Agilent 5100/5110/5800/5900 and Analytik Jena ICP-OES.Optimum nebulizer gas flow rate is 0.7L/min and sample flow rate is 1.0mL/min. Recommended not to exceed optimum 1.0mL/min sample flow rate; however, lower gas and sample flow rates are OK. The backpressure should read approximately 40 psi at 0.7L/min gas flow rate. The Conikal nebulizer is a high-performance, general use glass nebulizer, that tolerates up to 5% TDS and 75um particulates.Replacement parts include P/Ns 502702959 and 501907289.Recommend nebulizer maintenance tools are Fluka RBS25 (P/N NC9000117) and Eluo Nebulizer Cleaning Tool (P/N NC9462559). When nebulizer is not in use, best to store in the provided hard plastic case.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Perkin Elmer US LLC Quartz Torch Bonnet for Optima 2x00/4x00/5x00/7x00 DV
The torch bonnet is used as a spacer between the torch and RF load coil. This bonnet is included in the Organics Kit for Optima 4300 V/5300 V/7300 V(N0770732), the Scott/Cross-Flow II Sample Introduction Kit for Optima 2x00/4x00/5x00/7x00 DV (N0770731), and the Cyclonic/Concentric Sample Introduction Kit for Optima 2x00/4x00/5x00/7x00 DV (N0770730).
Perkin Elmer US LLC Advanced Platform THGA Graphite Tubes, Pkg. 5
The exclusive and patented Advanced Platform design offers an alternative to our Standard Integrated Platform design. With the current Integrated Platform design, the platform attaches to the tube wall along a single side that runs the length of the platform.
Chemplex Industries CONT ROLL MYLAR 0.10MIL
CHEMPLEX THIN-FILM, CONTINUOUS ROLL, Mylar(TM), 2.5u (0.10mil)
Chemplex Industries SAMPLE CUPS 31.2MM DIA. DBL OP
CHEMPLEX XRF SAMPLE CUPS, 31.2 Dia., mm, Double open ended, Snap-On Rings have integrated thin-film trimmer
Chemplex Industries SAMPLE CUPS 31.2MM DIA. DBL OP
CHEMPLEX XRF SAMPLE CUPS, 31.2 Dia., mm, Double open ended
Chemplex Industries SAMPLE CUPS 39.4MM DIA. SGL OP
CHEMPLEX XRF SAMPLE CUPS, 39.4 Dia., mm, Single open end
Chemplex Industries 30.5 DIA. MM SAMPLECUP 1.0CC
CHEMPLEX XRF SAMPLE CUPS, 30.5 Dia., mm, 1.0cc Capacity, SpectroMicro(TM) Sample Cup
Chemplex Industries SAMPLE CUPS 34.3MM DIA. DBL OP
CHEMPLEX XRF SAMPLE CUPS, SpectroCup(TM), 34.3 Dia., mm, Double open ended, Internal Overflow Reservoir
Glass Expansion Slurry U-Series Nebulizer 4mL/min, Includes NFT-16-75 UniFit Connector with 0.75mm ID x 1.6mm OD x 700mm long tubing (1 piece), and EL-1 EzyLok Connector Kit.
Slurry U-Series Nebulizer 4.0mL/min, includes UniFit Connector with 0.75mm ID x 1.6mm OD x 700mm long tubing (1 pc) and EzyLok Connector (1 pc).Optimum nebulizer gas flow rate is 1.0L/min and sample flow rate is between 1.5 & 2.5mL/min. Recommended not to exceed 4.0mL/min sample flow rate; however, lower gas & sample flow rates are OK. The backpressure should read ~40 psi at 1.0L/min gas flow rate. The Slurry nebulizer is ideal for aspirating slurries or suspensions as it has a high tolerance for particulates, up to 150um. TDS tolerance up to 1%.Replacement parts include P/Ns NFT-16-75 and EL-1.Recommend nebulizer maintenance tools, Fluka RBS25 (P/N NC9000117) and Eluo Nebulizer Cleaning Tool (P/N NC9462559). When nebulizer is not in use, best to store in the provided hard plastic case.Consider upgrading to our new Direct Connect (DC) Slurry to take advantage of the cost-effective design improvements.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Quartz Torch 2.5mm injector with gas fittings for Spectro EOP
Quartz Torch, single-piece, 2.5 mm injector, with gas fittings for Spectro EOP ICP-OES (75160526).Suitable for routine aqueous analysis, but not inert to samples containing hydrofluoric acid (HF).Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
